Brother DCP-J140W - Manual (Page 19)

19
For Wireless Network Users
Wirele
ss Network
e
Choose Yes, I have a USB cable to use for
installation. and then click Next.
f
Temporarily connect the USB cable (not
included) directly to the computer and the
machine.
If the confirmation screen appears, check the
box and click Next, go to
g.
Otherwise, go to h.
g
When the following screen appears, check Yes
if you want to connect to the listed SSID. Click
Next and go to
j.
h
When the following screen appears, the wizard
will search for wireless networks available to
your machine. Choose the SSID that you wrote
down for your network in step
11-a on
page 16, and then click Next.
Note
If this screen appears, read the Important
Notice. Check the box after you confirm the SSID
and Network Key, and then click Next.
Note
• If the list is blank, check that the access point
has power and is broadcasting the SSID, and
then see if the machine and the access point
are within range for wireless communication.
Then click Refresh.
• If your access point is set to not broadcast the
SSID you can manually add it by clicking the
Advanced button. Follow the on-screen
instructions for entering the Name (SSID), and
then click Next.