Brother MFC-9450CDN - Manual (Page 204)

188
2
Push the drum unit in until it stops.
i
Close the front cover of the machine.
Packing and shipping
the machine
C
If for any reason you must move or ship your
machine, carefully re-pack the machine in the
original packing material to avoid any
damage during transport. If you do not pack
the machine properly, you could void your
warranty. The machine should be adequately
insured with the carrier.
If the machine must be shipped, please read
the instructions in this section which explains
how to properly prepare your machine for
transport.
WARNING
Once your machine has been set up and
used, we do not recommend that it be
moved or shipped unless absolutely
necessary.
Color laser printers are complex printing
devices. Moving the machine or shipping it
without properly removing the installed
supplies can result in SEVERE damage to
the machine. As a result, your machine may
not operate properly afterwards.
Failure to properly prepare the machine for
shipping according to the instructions in this
section may
VOID YOUR WARRANTY.
To prevent injuries when moving or lifting
this machine, make sure at least two people
lift the machine together. Be careful not to
pinch your fingers when you put the
machine down.