ATI Technologies X1950 PRO - Manual (Page 18)

12
Launching Catalyst ™ Control Center Using Hot Keys
• You can press the predefined combination of keys Ctrl+Alt+C to
launch Catalyst
™
Control Center, or you can define your own hot key
sequence by using the Catalyst
™
Control Center’s Hotkey Manager.
Enable CrossFire
™
1 From the Tree View pane, click CrossFire
™
in Advanced View.
2 Click Enable CrossFire
™
.
When CrossFire
™
is successfully enabled all display devices, except the one
used by CrossFire
™
, will be disabled.
Note: CrossFire
™
Higher Quality anti-aliasing can be adjusted in the
Catalyst
™
Control Center 3D settings aspect.