Brother DCP-130C - Manual (Page 35)

Chapter 3
22
Making N in 1 copies or a
poster
3
You can reduce the number of pages for
copies by using the N in 1 copy feature. This
allows you to copy two or four pages onto one
page, which allows you to save paper.
You can also produce a poster. When you
use the poster feature your machine divides
your document into sections, then enlarges
the sections so you can assemble them into a
poster.
Important
3
„ Please make sure paper size is set to
Letter
or A4.
„ You cannot use the Enlarge/Reduce
setting with the N in 1 and poster features.
„ N in 1 color copies are not available.
„ (P) means Portrait and (L) means
Landscape.
„ You can only make one poster copy at a
time.
a
Load your document.
b
Press Copy Options and a or b to
choose Page Layout.
Press OK.
c
Press a or b to choose 2 in 1 (P),
2 in 1 (L)
, 4 in 1 (P),
4 in 1 (L)
, Poster(3 × 3) or
Off(1 in 1)
.
Press OK.
d
Press Black Start to scan the
document.
You can also press Color Start if you
are using the Poster layout.
e
After the machine scans the page, press
Yes
to scan the next page.
Next Page?
a Yes b No
f
Place the next document on the scanner
glass. Press OK.
Repeat e and f for each page of the
layout.
Set Next Page
Then Press OK
g
After all the pages have been scanned,
press b (No) in e to finish.
Note
If any photo paper is selected as the paper
type setting for N in 1 copies, the images
will be printed as if plain paper had been
selected.
Place your document face down in the
direction shown below:
„ 2 in 1 (P)
„ 2 in 1 (L)
„ 4 in 1 (P)
„ 4 in 1 (L)
Press Copy/Options
and then a or b to
choose Page Layout
Off(1 in 1)
2 in 1 (P)
2 in 1 (L)
4 in 1 (P)
4 in 1 (L)
Poster(3 x 3)