Nilfisk-ALTO Classic 12 - Manual (Page 6)

Page 6 AMERICAN SANDERS TECHNOLOGY Classic 12 Belt Sander Operator's Manual
Introduction and Machine Specifications
PART NUMBER 07055C 07056C
ABRASIVE BELT SIZE 11-7/8" W x 31-1/2" L 30cm X 80cm
CONTACT WHEEL SPEED (RPM) 2850 2375
ABRASIVE SPEED 5262 sfm (surface feet per minute) 22m/second
DUST FAN SPEED (RPM) 6800 5667
DUST FAN FLOW 234 cfm (cubic feet per minute) 110 liters/second
MOTOR (07055A) 4hp 230V 60Hz 2.2kW 230V 50Hz
LEVELING CONTROL Externally adjustable
OPERATING CONTROL Adjustable lever/grip
MOTOR STARTER/PROTECTOR Magnetic circuit breaker
SANDING PRESSURE ADJUSTMENT Infinitely adjustable
WHEELS Replaceable 3½" O.D. 89mm
BEARINGS Radial ball, permanently lubricated
DIMENSIONS 37"H x 18½"W x 35"L 94cm x 47cm x 89cm
WEIGHT 277 lbs. (300 lbs. with cord) 126 kg (136kg with cord)
CAUTION: Your equipment may be inappropriate on some installations. Some softer
woods used in flooring cannot support the pressure created by hard wheels.
A felt or rubber wheel should be used when these woods are encountered.
See parts list for optional wheels.
Always consult with the flooring manufacturer on the proper installation,
preparation, and finishing of their product. Determine suitability of your
equipment in preparing the product.
Operating Control Lever
Motor Starter / Protector
Tension Release Lever
Sanding Pressure Adjustment
Level Adjustment Nut