Nilfisk-ALTO Classic 12 - Manual (Page 9)

AMERICAN SANDERS TECHNOLOGY Classic 12 Belt Sander Operator's Manual Page 9
NOTE: It is not always necessary to adjust the fan
belt independently during this procedure or during
replacement.
NOTE: New drive belts may shed particles of rubber
until seated to the pulley grooves. This seating
process can take up to 24 hours to accomplish.
6. Close the belt guard door.
7. Plug the motor pigtail in. Twist clockwise to lock.
Transporting the Machine - Two People
When transporting the machine with two people follow
this procedure:
1. One operator places hands under the front of the
machine main casting.
2. Person #2 lifts the machine by the handle.