Brother FAX-T106 - Manual (Page 53)

Setup Receive
5 - 13
To Activate Certain Network Services When Using Call
Reply
The required prefix, typically three to six digits (including # and
symbols) in length, may be inserted after displaying the desired
Caller ID in step 3 on the previous page. (You can enter the prefix
up to 20 digits on the machine.) The complete number string
including the prefix will then be dialled by pressing Fax Start.
Select the desired Caller ID, wait 2
seconds until you see the date and
time the Caller ID was received.
Enter the prefix by using number
keys up to 20 digits.
■
The display will be cleared when you press any of the number
keys.
■
To cancel the prefix (such as when you entered the wrong
number), simply press Stop/Exit.
■
The display will return to the desired Caller ID you selected.
■
If you press Stop/Exit again, the machine will return to the
current date and time display. You are no longer in the call reply
mode.
■
Any problems or queries in using network services should be
raised in the first instance with your network operator(s).
■
With Call Reply, automatic redial does not function in cases
where the called party is busy or doesn’t answer.
Clearing the Caller ID Stored in Memory (FAX-T106 only)
For the effective use of the memory, it is recommended that you
should clear the Caller ID stored into memory by pressing Erase
when the screen displays the number.
Printing Caller ID List
1
Press Menu/Set, 0, 3.
2
Press
▲ or ▼ to select PRINT REPORT, and press Menu/Set.
3
Press Stop/Exit.
You may wish (in order to activate certain network services),
to insert a special prefix to be dialled in front of the Caller ID
number when using the Call Reply feature.
For example, - Your outgoing Caller ID withheld
25)09/11 15:25
DIAL:PRESS START