Brother MFC 8220 - Manual (Page 44)

42
Installing the Driver & Software
I
If the MFC is un-configured for your
network:
Select the APIPA or un-configured device
from the list and then click Next.
→ Go to J
If the MFC is configured for your network:
Select the MFC from the list and then click
Next.
→ Go to M
J
Click Configure IP Address.
K
Enter the proper IP Address information for
your network, and then click OK.
(e.g. Enter 192.168.0.105 for IP Address)
L
Click Next.
Windows
®
98/98SE/Me/2000/XP Users
➝ Go to M
Windows
®
95/NT Users
➝ Go to P
M
Select yes and then click Next to configure
Network Scanning.
N
Click Next or enter the name you want
displayed on the LCD for your PC and then
click Next. The default name is the name of
your PC.
Please wait for the window to open.
For Optional NC-9100h Network Interface Users
(For Windows
®
95/98/98SE/Me/NT/2000 Professional/XP)
See the For Administrator section of this
guide or the NC-9100h User's Guide located
on the CD-ROM for more network
configuration information.
You can avoid receiving unwanted
documents by setting a 4-digit PIN Number.
Step 2