Brother MFC 8220 - Manual (Page 6)

4
Setting Up the Machine
DO NOT connect the interface cable.
Connecting the interface cable is
done when installing the driver.
1
Attach the ADF document support.
2
Open the control panel cover by lifting it
toward the back.
3
Attach the ADF Support.
4
Close the control panel cover.
1
Open the front cover by pressing the front
cover release button.
2
Unpack the drum unit assembly.
Remove the protective part.
1 Attaching the Supports
ADF Document
Support
Control Panel Cover
ADF Document Output Support
2
Installing the Drum Unit
Assembly
Front Cover
Release Button
Front Cover
Drum Unit
Assembly
Protective Part
Step 1