Brother MFC 8220 - Manual (Page 57)

GETTING STARTED 4 - 2
Setting the Station ID
You should store your name or company name and fax number to be
printed on all fax pages that you send.
It is important that you enter the fax and telephone numbers in the
internationally standardized format, i.e. in accordance with the
following strict sequence:
■
The “+” (plus) character (by pressing key)
■
Your Country Code (e.g. “44” for the United Kingdom, “41” for
Switzerland)
■
Your local area code minus any leading “0” (“9” in Spain)
■
A space
■
Your number on the local exchange, using spaces to aid
readability as appropriate.
As an example, if the machine is installed in the United Kingdom and
the same line is to be used for both fax and voice calls, and your
national telephone number is 0161-444 5555, then you must set the
fax and telephone number parts of your station ID as: +44 161 444
5555.
1
Press Menu , 0 , 3 .
2
Enter your fax number (up to 20
digits).
Press Set .
3
Enter your telephone number (up to 20 digits).
Press Set .
(If your telephone number and fax number are the same, enter
the same number again).
■
The telephone number you enter is only used for Cover
Page features. (See Composing the electronic Cover Page
on page 6-10.)
■
You cannot enter a hyphen.
Initial Setup
3.Station ID