Brother MFC 8220 - Manual (Page 86)

6 - 4 SETUP SEND
Automatic transmission
This is the easiest way to send a fax.
1
If it is not illuminated in green, press ( Fax ). Place the
original document face down in the ADF.
2
Enter the fax number using the dial pad, One-Touch,
Speed-Dial or Search.
(See One-Touch dialling on page 6-2 and Speed-Dialling on
page 6-2.)
3
Press Start .
Out of Memory message
If you get an Out of Memory message while scanning the first page
of a fax, press Stop/Exit to cancel the fax. If you get an Out of
Memory message while scanning a subsequent page, you will have
the option to press Start to send the pages scanned so far, or to
press Stop/Exit to cancel the operation.
Sending a fax at the end of a conversation
At the end of a conversation you can send a fax to the other party
before you both hang up.
1
Ask the other party to wait for fax tones (beeps) and then to
press
Start before hanging up.
2
If it is not illuminated in green, press ( Fax ). Place the
original document face down in the ADF.
Press Start .
3
Replace the external handset.