Brother FAX-T94 - Manual (Page 86)

6 - 16 SETUP SEND
Setting up Polled Transmission (Standard)
Polling Transmit is when you set up your fax machine to wait with a
document so another fax machine can retrieve it.
1
Insert the document to be retrieved in the ADF.
2
Press Menu/Set , 3 , 8 . The screen
displays.
3
Press or to choose STANDARD , and press Menu/Set .
4
Press 1 to select DOC if you want
your machine to scan the printed
document at the time it is polled.
—OR—
Press 2 to select MEMORY .
5
Press 1 if you want to select additional settings. The display
returns to the SETUP SEND menu.
—OR—
Press 2 if you are finished choosing
settings and go to Step 6.
6
Press Fax Start .
If you do not store the polled document into memory in Step 4,
the polled document remains on the ADF until your machine is
polled. However, you can “interrupt” it to send another fax. (See
Interrupting Delayed Fax and Polled Transmit jobs on page
6-20.)
The document on the ADF can only be polled once unless they
have been stored in memory.
8.POLLED TX
1.DOC 2.MEMORY
ACCEPTED
NEXT
1.YES 2.NO