Auto Page Professional Vehicle Security System RF-420LCD - Manual (Page 2)

2
TRANSMITTER OPERATION:
Transmitter
Button
System Function Remark
Lock Doors & Arm System
Panic function Press and Hold for 3 seconds
Car Locator Under armed mode
- Arm and Delete The 2 Stage Shock
Sensor
Press twice within 3 seconds
+ Silent Arming / Disarming Ignition in "off" position.
Unlock Doors & Disarm System
- Two Steps Door Unlock & Disarm
System
Press twice within 3 seconds.
Trunk Release (Channel 2) Press and Hold for 2 seconds
-
Passive Arming By -pass While the system Disarmed.
Silent Arming
+ 3 rd Channel Press buttons together
+ 4 th Channel Press buttons together
II
Switching code For 2nd Car
Operat ion.
For regular remote transmitter Only
ACTIVE ARMING – LOCK & ARM:
1. Press button on transmitter.
2. The siren will chirp once and parking light will flash once indicating that the system is now
armed. The vehicle doors will loc k upon arming when interfaced with the security system.
Note: Defective sensor reminder:
If the siren sounds 3 chirps, then you have left a door, trunk, or hood lid ajar.
System Arm
Door Ajar Trunk / Hood Ajar AJAR WARNING:
I f the siren sounds 3
chirps, then you have
left a door, trunk, or
hood lid ajar.
SILENT ARMING / DISARMING: Press the
button on the transmitter to arm or disarm your
security system with no chirp sound heard; arm / disarm confirmation will be through the vehicles
parking lights only.
SHOCK SENSOR / OPTIONAL SENSOR BY-PASS:
Press the
button on the transmitter twice within 3 seconds will arm the security system, by -
pass the shock sensor or the optional sensor connected to 4 pin plug. The system will chirp one
additional time to confirm the sensor bypass mode was activated. The sensor bypass feature is
programmed to activate for one arming cycle only. The security system will return to normal
operation during the next arming cycle.