Wired lan factory default settings – Canon LV-7392A User Manual
Page 16
Advertising
16
Chapter 2 Setup Procedures
Wired LAN factory default settings
Parameter
SELECTED LAN
LAN 1
LAN 2
LAN 3
DHCP
OFF
ON
OFF
IP ADDRESS
169.254.100.100
192.168.100.100
192.168.100.100
SUBNET MASK
255.255.0.0
255.255.255.0
255.255.255.0
GATEWAY ADDRESS
255.255.255.255
255.255.255.255
255.255.255.255
DNS ADDRESS
255.255.255.255
255.255.255.255
255.255.255.255
[Note]
Because DHCP is ON at "LAN 2", the values of IP ADDRESS, SUBNET, GATEWAY ADDRESS, DNS
will be changed through DHCP. The above values of "LAN2" are displayed when the projector
is not connected to the network or DHCP is not available.
Advertising
This manual is related to the following products: