Canon LV-7392A - Manual (Page 37)

37
ENGLISH
Sound
This function is to adjust the sound of the
projector. The values in the text box represent
the current control value or status.
Item Description
Volume ................... Adjusts the sound volume from the
speaker. (0 ~ 63)
Mute ......................... Suppresses the sound. (ON, OFF)
✐ The MIC functions MIC, MIC GAIN, STANDBY MIC OUT cannot be selected through the
network. When using the MIC functions, please set by using the On Screen Menu of the projector.
Item Description
Contrast ......................... Adjusts picture
contrast (0~ 63)
Brightness ..................... Adjusts picture
brightness (0~ 63)
Color ................................ Adjusts picture color
saturation (0~ 63)
Tint ................................... Adjusts picture hue
(0~ 63)
Auto iris .......................... Switches iris mode.
(ON, OFF)
Color temp. ................... Sets a color temperature
mode. (High, Mid, Low,
X Low, User)
White balance
Red, Green, Blue .... Adjusts each white
balance respectively.
(0~ 63)
* When changing the value of the
white balance, the color temp.
indicates "User".
Sharpness ........................... Adjusts picture
sharpness. (0~ 15)
Gamma .................................... Adjusts brightness of darker part of the picture. (0~ 15)
Noise reduction ................ Switches noise reduction mode (OFF, L1, L2)
Progressive ............................ Switches progressive mode (OFF, L1, L2, Film)
Reset .....................................Resets the Image adjustment to previous levels.
Store ..................................... Stores the Image adjustment values. Select an item [Image1 - Image4] from
the pull-down menu and click Store button.
Load image mode ........... Loads the Image mode. Select an image mode from the pull-down menu
and click Load button. {Presentation, Standard, High contrast, Cinema,
Blackboard(Green), Colorboard, Image1 - Image4}
Image adj.
This function is to adjust the projected picture image and save the image mode. To store
the adjusted value, click Store button, and to load the adjusted value, click Load button.
Sound