Canon LV-7392A - Manual (Page 41)

Computer Input
41
VIDEO Input
Choose VIDEO or S-VIDEO by pressing the
VIDEO or the S-VIDEO button on the remote
control unit.
1
2
VIDEO
Input Source Selection (VIDEO, S-VIDEO)
Direct Operation
When video input signal is
connected to the VIDEO jack, select
VIDEO.
VIDEO
When the input source is coming
from video equipment connected
to the COMPUTER IN/S-VIDEO
IN/COMPONENT IN terminal
with a S-VIDEO-VGA cable,
select S-VIDEO.
S-VIDEO

Note:
When the Auto input function is set to On 1 or On
2 in the Auto setup function, the input signal will be
searched automatically (p.52).
LV-RC06
Remote control unit
VIDEO button
Press the MENU button to display the
On-Screen Menu. Use the Point ▲▼
buttons to select Input and then press the
Point ► or the OK button.
Use the Point ▲▼ buttons to select
VIDEO and then press the OK button.
S-VIDEO button
VIDEO
S-VIDEO
Use the Point ▲▼ buttons to select
COMPUTER. And then press the Point ►
button to access the submenu items. Use the
Point ▲▼ buttons to select the S-VIDEO and
then press the OK button.
Computer
Menu Operation
S-VIDEO
Press the Point ▲▼ buttons
to select S-VIDEO.