Canon LV-7392A - Manual (Page 27)

Basic Operation
27
Basic Operation
1
2
Press the MENU button to display the
On-Screen Menu. Use the Point ▲▼
buttons to select Sound. Press the Point
► or the OK button to access the submenu
items.
Press the VOLUME+/– buttons on the top
control or on the remote control unit to adjust
the volume. The volume dialog box appears on
the screen for a few seconds.
Press the MUTE button on the remote control
unit to select On to temporarily turn off the
sound. To turn the sound back on, press the
MUTE button again to select Off or press the
VOLUME +/– buttons. The Mute function is
also effective for the AUDIO OUT jack.
Press the OK button to switch the mute
function On/Off. When the sound is turned
off, On is displayed. Press the VOLUME +/–
buttons again or adjust MIC gain’s volume to
turn the sound back on.
Use the Point ▲▼ buttons to select the
desired submenu item and press the OK
button to access the selected item.
Volume
Volume
Mute
Press the Point ► button to turn up the
volume; Press the Point ◄ button to turn down
the volume.
Mute
Menu Operation
Sound Menu
Volume Dialog Box
LV-RC06
Remote control unit
VOLUME + button
VOLUME - button
MUTE button
Top Control
Approximate level
of the volume.
Press the MUTE button to set the
Mute function On or Off. The dialog
box disappears after 4 seconds.
Direct Operation
OK
POWER
AUTO SET
MENU
LAMP REPLACE
WARNING
VOL VOL
VOLUME +/- buttons
Use the Point ▲▼ buttons to switch the MIC
function On/Off, and then press the OK button.
When On is selected, the synthesis volume
(MIC and RCA) is output.
MIC
MIC GAIN
Press the Point ► button to turn up the MIC
mixing gain; Press the Point ◄ button to turn
down the MIC mixing gain.
AUDIO INPUT SELECTION (see pages 17-19)
 Note:
• When Off is selected in MIC function, the MIC GAIN and STANDBY MIC OUT functions are not available.
• Only the Standby mode is set to Network, STANDBY MIC OUT can be selected.
• If the MIC function is turned on when connecting PC audio to the AUDIO IN (a mini jack), loud sound may be
output suddenly depending on the setting value of MIC GAIN.
• Press the Point ◄► buttons on the top control or on the remote control unit to adjust the MIC input volume.
STANDBY MIC OUT
When setting the STANDBY MIC OUT function
to On and in Standby mode status, only MIC
input volume can be output.
AUDIO IN
MIC
Setup
RCA L/R
terminal
Mini jack
HDMI
(digital
audio)
MIC Off
VIDEO audio
input
PC audio
input
HDMI
audio
MIC On VIDEO or PC
audio input
MIC input ---
MIC on
for HDMI ---
---
HDMI
audio(1)
Sound Adjustment
 1 HDMI setup = HDMI