Maintenance and cleaning, Warning indicator – Canon LV-7392A User Manual

Page 65

Advertising
background image

65

OK

POWER

AUTO SET

MENU

LAMP REPLACE

WARNING

VOL

VOL

The WARNING indicator shows the state of the function which protects the projector. Check the

state of the WARNING indicator and the POWER indicator to take proper maintenance.

WARNING indicator

The projector is shut down and the

WARNING indicator is blinking red.

When the temperature inside the projector

reaches a certain level, the projector will be

automatically shut down to protect the inside

of the projector. The POWER indicator is

blinking while the projector is being cooled

down. When the projector has cooled down

enough (to its normal operating temperature),

it can be turned on again by pressing the

POWER button.

The projector is shut down and the

WARNING indicator lights red.
When the projector detects an abnormal

condition, it is automatically shut down to

protect the inside of the projector and the

WARNING indicator lights red. In this case,

unplug the AC power cord and reconnect it,

and then turn the projector on once again to

verify operation. If the projector cannot be

turned on and the WARNING indicator still

lights red, unplug the AC power cord and

contact the service center.

WARNING

DO NOT LEAVE THE PROjECTOR

WITH THE AC POWER CORD

CONNECTED UNDER AN

ABNORMAL CONDITION. IT MAY

RESULT IN FIRE OR ELECTRIC

SHOCK.

Top Control

Top Control

Note:

The WARNING indicator continues to blink even

after the temperature inside the projector returns

to normal. When the projector is turned on again,

the WARNING indicator stops blinking.

Then check the matters below:
– Did you provide appropriate space for

the projector to be ventilated? Check the

installing condition to see if the air vents of

the projector are not blocked.

– Has the projector been installed near an Air-

Conditioning/ Heating Duct or Vent? Move

the installation of the projector away from

the duct or vent.

– Is the filter clean? Clean the filter

periodically.

WARNING

blinking red

Maintenance and Cleaning

OK

POWER

AUTO SET

MENU

LAMP REPLACE

WARNING

VOL

VOL

WARNING

lights red

Advertising
This manual is related to the following products: