Canon Speedlite 270EX II - Manual (Page 10)

8
When you set the camera shooting mode to <V> or Full Auto, you can shoot in fully
automatic flash mode.
1
Set the power switch to <ON>.
B The flash recycling starts.
2
Check that the <Q> lamp is lit.
When the <Q> lamp lights, you can shoot with the
flash.
See p.26 for guidelines about the flash shooting range.
Shooting is also possible when the lamp is blinking (Quick Flash), but the flash
output level will be 1/2 to 1/3 the normal flash.
3
Take the picture.
Fully Automatic Flash Shooting
When the resulting picture is dark, move closer to the subject or increase the ISO speed
and try shooting again.
Quick Flash cannot be used when the flash mode is set to M: Manual Flash (p.14).
Quick Flash cannot be used during continuous shooting. (To enable flash, see p.16)
Set the power switch to <SLAVE> for wireless flash shooting (p.17).
COP
Y