Canon Speedlite 270EX II - Manual (Page 22)

20
1
Set the camera to <R> (Remote control
shooting).
For the setting method, see the explanations about
the drive mode or remote control shooting in the
camera’s instruction manual.
Shade the eyepiece of the camera viewfinder so
that light does not enter.
2
Take the picture.
Check that the <Q> lamp is lit, point the remote
control transmitter toward the camera, and press
the remote release button.
B The picture is taken after two seconds.
When wireless flash shooting is enabled and the
power switch on the 270EX II is set to <SLAVE>, the
270EX II fires.
Be careful not to cover the remote control transmitter or the wireless sensor of the
270EX II with your hand.
The remote control function has an operation range of about 5 m / 16.4 ft. from the front of
the camera.
Check the shooting results while performing remote control shooting.
COP
Y