Rtp] rtp server, audio multicast and rtp streaming, P. 57 – Canon VB-H41 User Manual

Page 57

Advertising
background image

57

S

et

ting P

age

5

RTP Server

(1) [RTP]

Set RTP to [Disable] or [Enable].

(2)

[RTSP Authentication Method]

Set the RTSP authentication method to [Basic

Authentication], [Digest Authentication], or [No

Authentication].

(3) [RTSP Port]

Set the RTSP port number to 554 or in the range of

1024 to 65535.

Normally [554] (factory default setting) is used.

Audio Multicast

(1) [Multicast Address]

Set the multicast address for audio transmission in the

range 224.0.0.0 to 239.255.255.255 (IPv4) or an

address beginning with ff00::/8 (IPv6).

To disable Multicast, set to [0.0.0.0] (IPv4) or [::0(::)]

(IPv6).

(2) [Multicast Port]

Set the multicast port number for audio transmission

to an even number in the range 1024 to 65534.

To disable Multicast, set to [0].

(3) [Multicast TTL]

Set the effective scope of multicast distribution

between 0 and 255.

To disable Multicast, set to [0].

The TTL (Time To Live), representing the effective

scope of multicast distribution, is decremented each

time the signal passes through a router. When the

value reaches 0, the signal can no longer be

distributed. For example, if TTL is set to [1], multicast

distribution is confined to the local segment only and

cannot be distributed by the router.

RTP Streaming 1 to 5

You can make settings for each stream, RTP Streaming 1

to RTP Streaming 5, in a 5-session RTP stream

distribution.

(1) [Video Size]

Select [320x240 JPEG], [480x270 JPEG], [960x540

JPEG], [1920x1080 JPEG], or [H.264] for the format

and size of video for RTP streaming.

[H.264] cannot be set for multiple RTP streams.

(2) [Frame Rate]

Set the frame rate if the RTP stream is JPEG video.

Cannot be configured for H.264.

(3) [Multicast Address]

Set the multicast address for RTP streaming in the

range 224.0.0.0 to 239.255.255.255 (IPv4) or an

address beginning with ff00::/8 (IPv6).

To disable Multicast, set to [0.0.0.0] (IPv4) or [::0(::)]

(IPv6).

(4) [Multicast Port]

Set the multicast port number for RTP streaming to an

even number in the range 1024 to 65534.

To disable Multicast, set to [0].

(5) [Multicast TTL]

Set the effective scope of multicast distribution for

RTP streaming between 0 and 255.

To disable Multicast, set to [0].

The TTL (Time To Live), representing the effective

scope of multicast distribution, is decremented each

time the signal passes through a router. When the

value reaches 0, the signal can no longer be

distributed. For example, if TTL is set to [1], multicast

distribution is confined to the local segment only and

cannot be distributed by the router.

(6) [Audio Transmission]

Set RTP streaming audio transmission to [Disable] or

[Enable].

[RTP]
RTP Server, Audio Multicast and RTP Streaming

The following can be set here.

• RTP Server

Enable RTP, and set the RTSP authentication

method and port number.

• Audio Multicast

Make settings for multicast audio transmission.

• RTP Streaming 1 to 5

Make settings for RTP streaming of video,

multicasting, and audio transmission.

Advertising
This manual is related to the following products: