Preparing the camera for use – Canon VB-H41 User Manual

Page 24

Advertising
background image

24

Preparing the Camera for Use

Performing Initial Settings for the Camera

Before installing the camera, read this chapter and use the VB Initial Setting Tool to

configure the IP address.

“Installing the Necessary Software” (p. 26)

“Performing Initial Settings for the Camera” (p. 28)

Checking Images

When initial settings are complete, access the camera via a web browser and check the

image using the VB Viewer.

“Checking the Camera Image” (p. 29)

Installing the Camera

Install the camera to suit the operating environment it will be used in.

“Installation Guide”

Setting the Camera Angle

Use the Camera Angle Setting Tool to set the camera angle via PC operation.

“Installing the Necessary Software” (p. 26)

“Chapter 3 Camera Angle Setting Tool”

Configuring the Camera from the Setting Page

The setting page lets you configure basic camera settings, network operations, user

registration, and access restrictions.

“Chapter 5 Setting Page”

Using Admin Tools

Admin Tools let you set viewing restrictions, make preset settings, and make settings for

using intelligent functions. In addition, you can review logs to check on the camera's

operation status.

“Chapter 6 Admin Tools”

Advertising
This manual is related to the following products: