P. 51) – Canon VB-H41 User Manual

Page 51

Advertising
background image

51

S

et

ting P

age

5

Camera Name

[Camera Name]

Be sure to enter [Camera Name (alphanumeric

characters)].

Up to 15 ASCII characters (spaces and printable

characters) may be used for [Camera Name

(alphanumeric characters)].

Note

• The camera name set here will be shown when the camera is

registered for use with included RM-Lite.

Initial Camera Settings

(1) [AE Mode], [Slow Shutter], [Shutter Speed]

Set the exposure control and shutter speed for the

camera startup.

[AE Mode]

[Auto]

The exposure is controlled automatically.

[Auto (Flickerless)]

In this mode, image flickers caused by fluorescent

lights, etc., can be reduced. The shutter speed is

automatically adjusted according to the brightness

of the environment in which the camera is used.

[Auto (Shutter-priority AE)]

In this mode, a desired shutter speed can be

specified.

[Slow Shutter]

Slow shutter can be used only if [Auto] is selected in

[AE Mode].

Set the maximum slow shutter time to be used when

in auto exposure mode when capturing video in a

dark place. Select [Disable], [1/15], [1/8], [1/4] or

[1/2]. As slower shutter speed generates residual

images when capturing a moving subject, select an

appropriate time according to the capture conditions.

[Shutter Speed]

Shutter speed can be used only if [Auto (Shutter-priority

AE)] is selected in [AE Mode].

Select a desired shutter speed from the 16 levels from

[1/2] to [1/16000]. When capturing a moving subject,

selecting a higher shutter speed can reduce blurry image

capture.

(2) [Exposure Compensation]

The exposure compensation when the camera starts

can be set in the range of [-4 (Dark)] to [4 (Bright)]. To

brighten the image, set a positive value. To darken the

image, set a negative value.

(3) [Metering Mode]

Set the metering mode when the camera starts.

[Center-Weighted]

The entire screen is metered by focusing on the

center of the screen.

Even when slightly darker/brighter areas are present

on the periphery of the screen, an appropriate

exposure can be achieved for the subject near the

center.

Use this mode if the subject is positioned near the

center of the screen.

[Camera] Setting Initial Camera Settings and External Device Name

The following can be set here.

• Camera Name

Enter the name of the camera. The camera name

is required for use with RM-Lite.

• Initial Camera Settings

Sets shooting settings at camera start up.

• Camera Control

Set the digital zoom, image stabilizer and AGC

limit.

• Day/Night

Set the day/night switching mode.

• Installation Conditions

Sets installation conditions, such as LED settings.

• Camera Position Control

Set whether or not to limit the pan, tilt and zoom

operations to the preset positions. Also, set the

camera position when nobody has control

privileges.

• External Device Name

Set the external input device name and external

output device name.

Advertising
This manual is related to the following products: