Canon PowerShot G1 X - Manual (Page 3)

3
Remove the cover and insert the
battery.
 After aligning the o marks on the battery and
charger, insert the battery by pushing it in
(
) and down ( ).
Charge the battery.
 Once you connect the power cord to the
charger and plug the cord into a power outlet,
the lamp will light up orange.
 When charging is finished, the lamp turns
green. Remove the battery.
 For details on charging time and the number
of shots or recording time available with a
fully charged battery, refer to “Specifications”
in the Camera User Guide.
Open the cover.
 Slide the switch ( ) and open the cover
( ).
Initial Preparations
Charging the Battery
Inserting the Battery and Memory Card
EC308_GS_EN.fm Page 3 Tuesday, December 20, 2011 2:18 PM