Canon i-SENSYS MF8580Cdw - Manual (Page 13)

13
En
Setting a Paper Size and Type
Follow the instructions on the screen, set the paper size
and type.
Specifying Initial Fax Settings and
Connecting a Telephone Cable
(MF8580Cdw / MF8550Cdn Only)
1
Specify the initial fax settings.
Follow the “Fax Setup Guide” to specify a fax number, a
unit name, and a receive mode. For more details on the
receive mode, see the e-Manual.
e-Manual “Faxing” ▶ “Receiving Faxes”
How to use a username
When you send a document, the sender information
that you registered is printed on the recipient’s paper.
2
Connect a telephone cable*.
Telephone line connector
Telephone
Handset (Optional)
When <Connect Telephone Line> appears on the
display, connect the telephone cable by referring to
the illustration. The Telephone Line Cord and Adapter
may be included with the machine, depending on your
country or region. For details on how to connect the
Telephone Line Cord and Adapter, see the e-Manual.
e-Manual “Setting Up the Machine” ▶ “Configuring
Initial Settings for Fax Functions (MF8580Cdw /
MF8550Cdn / MF8280Cw Only)” ▶ “Connecting the
Telephone Line”
When installing the optional handset:
For more details, see the supplied manual with the
handset.
* The telephone cable may be included with the machine,
depending on your country or region.
3
Exit the Fax Setup Guide, and then restart the
machine.
Turn OFF the machine and wait for at least 10 seconds
before turning it ON again. If the telephone line types
are not detected automatically, see the e-Manual and
set a telephone line manually.
e-Manual “Setting Menu List” ▶ “Fax Settings
(MF8580Cdw / MF8550Cdn / MF8280Cw Only)” ▶
“Basic Settings”