Canon PIXMA iP8750 - Manual (Page 289)

Cannot Print on the Disc Label
Disc Label Printing Does Not Start
Disc Tray Does Not Feed Properly
Disc Tray Jammed
Disc Label Printing Does Not Start
Check1 Is the disc tray placed properly?
Open the disc tray guide, properly place the disc tray again, then press the RESUME/CANCEL button on the
printer.
Use the disc tray supplied with this printer ("L" is on the upper side).
For details on how to place the disc tray, refer to Placing a Printable Disc .
Check2 Is the printable disc placed on the disc tray?
Place the printable disc on the disc tray properly, then press the RESUME/CANCEL button.
Use the disc tray supplied with this printer ("L" is on the upper side).
For details on how to place the disc tray, refer to Placing a Printable Disc .
Check3 If disc label printing stops before it is complete, try the operation again.
If a certain period of time has elapsed while disc label printing is in progress, the printer stops initializing.
The printer resumes initializing by pressing the RESUME/CANCEL button.
Try the operation again following the on-screen instructions.
Disc Tray Does Not Feed Properly
Check1 Is the disc tray placed properly?
Properly place the disc tray again, then press the RESUME/CANCEL button.
Use the disc tray supplied with this printer ("L" is on the upper side).
For details on how to place the disc tray, refer to Placing a Printable Disc .
Check2 Unrecognizable printable disc may be placed.
Canon recommends that you use printable discs specially processed to be printed on by an inkjet printer.
Disc Tray Jammed
Pull out the disc tray gently.
If the disc tray cannot be pulled out, turn the printer off, then turn the printer back on again. The disc tray
will automatically be ejected.
When the disc tray is pulled out, place the disc tray ("L" is on the upper side) again, then retry printing.
Place the printable disc properly referring to
Placing a Printable Disc .
If the disc tray is still jammed, check if there is a problem with the printable disc.
Disc Tray Does Not Feed Properly
289