Print results not satisfactory – Canon PIXMA iP8750 User Manual

Page 292

Advertising

Print Results Not Satisfactory

If the print result is not satisfactory due to white streaks, misaligned lines, or uneven colors, confirm the
paper and print quality settings first.

Check1

Do the page size and media type settings match the size and type of the loaded

paper?

When these settings are incorrect, you cannot obtain a proper print result.

If you are printing a photograph or an illustration, incorrect paper type settings may reduce the quality of the
printout color.

Also, if you print with an incorrect paper type setting, the printed surface may be scratched.

In borderless printing, uneven coloring may occur depending on the combination of the paper type setting and
the loaded paper.

The method of confirming the paper and print quality settings differs depending on what you do with your printer.

To print from a PictBridge (Wireless LAN)
compliant device

Confirm by using your PictBridge (Wireless LAN) compliant device.

About PictBridge (Wireless LAN) Print Settings

To print from a computer

Confirm by using the printer driver.

Printing with Easy Setup

Check2

Make sure that the appropriate print quality is selected referring to the table in

Check 1.

Select a print quality option suitable for the paper and image for printing. If you notice blurs or uneven colors,
increase the print quality setting and try printing again.

Note

• You cannot make this setting from a PictBridge (Wireless LAN) compliant device.

Check3

If the problem is not resolved, there may be other causes.