Canon RM-Software - Manual (Page 26)

26
Example of the Data Size for the VB-C50i/VB-C50iR/VB-C50FSi (JPEG)
(Units: KB)
Note that the data size may increase significantly when the image quality is set to [100].
Select [View] > [Video Information] in the Viewer bundled with the camera to display the data size per frame.
Sensor Recording, Motion Detection Recording, Intelligent Function Recording and
Volume Detection Recording
„ Notes on Using Sensor Recording, Motion Detection Recording, Intelligent Function Recording
and Volume Detection Recording
When an event occurs, data is saved in the Storage Server as an operation record. As the number of operation records
increases, operation during event detection and the search and Viewer response speeds may be affected.
„ Notes on Using Motion Detection Recording / Intelligent Function Recording
• The motion detection feature notifies you there is motion in an area when motion is not ordinarily expected. Do not use
this feature for busy areas where motion detection may be triggered frequently.
• Configure motion detection on the camera side. If you configure motion detection on the Storage Server side, the load on
the Storage Server may increase, resulting in decreased recording performance.
Use intelligent function recording instead of motion detection recording.
You cannot set motion detection on the camera.
Image
Quality
Image Size
160 Ч 120 320 Ч 240 640 Ч 480
30 3.1 8.2 24.7
40 3.6 9.7 29.8
50 4.1 10.9 34.2
60 4.6 12.5 40.3
70 5.3 14.8 49.7
80 6.5 18.8 64.9
90 9.4 28.4 106.4
Important
The actual data size may increase or decrease depending on the objects being recorded. Make sure to confirm the data size for the
actual system environment before starting operation.