P.26, Registering lens aberration correction/peripheral, P.26) – Canon EOS 1200D User Manual
Page 27: Cop y
26
You can register lens aberration correction/peripheral illumination
correction data for the lens to the camera, or delete registered data from
the camera.
For cameras where [Lens aberration correction] is displayed in the
[Shooting menu], data is registered or deleted for lens peripheral
illumination correction, distortion correction, and chromatic aberration
correction. (Data for distortion correction and chromatic aberration
correction is used during RAW processing on the camera.)
For cameras where [Peripheral illumin. correct.] is displayed in the menu,
only lens peripheral illumination correction data is registered or deleted.
You do not have to register correction data for an EF-M lens.
For
(firmware version 1.3.0 or later), lens aberration correction
data for EF Cinema lenses (CN-E lenses) can be registered to the
camera.
Registering Lens Aberration Correction/Peripheral
Illumination Correction Data for the Lens in the Camera
1D X
1D C
1D Mk IV 5D Mk III
5D Mk II
6D
7D
70D
60D
50D
REBELT5i
700D
REBELSL1
100D
REBELT4i
650D
REBELT3i
600D
REBELT2i
550D
REBELT1i
500D
REBELT5
1200D
REBELT3
1100D
M2
M
1D C
Lens aberration correction/peripheral illumination correction data
for the EF 200-400mm f/4L IS USM cannot be registered to
cameras other than
.
1D X
1D C
5D Mk III
6D
70D
REBELT5i
700D
REBELSL1
100D
REBELT4i
650D
M2
M
1
Click [Lens aberration correction] or [Peripheral
illumin. correct.].
The [Register lens aberration correction data] window or
[Register peripheral illumination correction data] window
appears. Lenses for which correction data is registered in the
camera are displayed with a check mark.
Window names that appear and data to be registered in the
camera differ depending on the camera. However, the following
steps are the same.
How to specify settings for
differs from that for
other cameras.
See “Specifying Settings for EOS M2 or EOS M Camera
Functions”
.
M2
M
COP
Y