3 summary of commands, Multitasker – Altinex Dual Twisted Pair Receiver to Computer / Component Video + Audio MT115-111 User Manual
Page 17
MULTITASKER
400-0443-004
16
24. [RMG]
This command deletes one or all groups.
Command Format: [RMGk]
Gk = Group ID (k = # from 1-8, * for all)
Example:
Remove all cards from G52 by sending [RMG5].
The system will return the following feedback:
[G5=0]
Example 2:
Remove all cards from all groups, effectively
deleting all groups, by sending [RMG
*
]. The
system will return the following feedback:
G1-G8: EMPTY
25. [RD]
This command reads and then displays the
members in a group.
Command Format: [RDGk]
Gk = Group ID (k = # from 1-8)
Example:
C2, C4, and C6 make up G5. Read the member
data for G5 by sending the command [RDG5].
The system will return feedback as follows:
[G5=C2C4C6]
The feedback shows G5 and then the cards that
make up G5. In this case, G5 includes C2, C4,
and C6.
7.3 SUMMARY OF COMMANDS
Basic Commands
1)
[VER]
Display firmware version
2)
[C]
Display card status
3)
[CnS]
Save card settings
4)
[..S]
Save current setting
5)
[CLR]
Reset card to defaults
6)
[TEST]
Test internal memory ICs
7)
[HELP]
Display available commands
Feedback Commands
8)
[FBD]
Feedback delay on/off
9)
[?]
Display system cards
10) [?C]
Display card information
11) [STA1]
Auto-feedback on
12) [STA0]
Auto-feedback off
Card Commands
13) [EQ]
Select equalization adjustment
14) [EQ=]
Set equalization level
15) [GAIN]
Select video gain adjustment
16) [GAIN=]
Set video gain level
ID Commands
17) [RSI]
Reset Card IDs to defaults
18) [SIDn]
Set all Card IDs
19) [SIDnCi]
Set one Card ID
20) [SID+]
Set all Card IDs to an offset
21) [RSN]
Display card slot number
Group Commands
22) [WR]
Add card(s) to a group
23) [RMC]
Remove card(s) from group
24) [RMG]
Delete group
25) [RD]
Display group members