Canon LV-8320 - Manual (Page 25)

LV-8320 Basic Serial Command Specifications
-22-
7.5. Input Mode Read Command
Command “CR1” [CR]
Detail Get the selected Input No.
Response
Acceptable “%1” [CR]
%1
”1” = Computer 1 is selected
”2” = Computer 2 is selected
“3” = HDMI is selected
“4” = Video is selected
“5” = S-video is selected
Unacceptable “?” [CR]
7.6. Lamp Time Read Command
Command “CR3” [CR]
Detail
Get the total lamp running hours (Not actual lamp used hour, but Eco mode
corresponding value).
Response
Acceptable “%1” [CR]
%1
Shows the time period with 5 digits numbers.
Example： “00410”[CR] ････shows 410 hours
Unacceptable “?” [CR]
7.7. Setting Read Command
Command “CR4” [CR]
Detail Get screen setting status such as Ceiling / Rear.
Response
Acceptable “%1” [CR]
%1
“11”[CR] = Normal Screen Setting
“10”[CR] = Picture is top/bottom reversed.
(Status: Rear＆Ceiling ON)
“01”[CR] = Picture is left/right reversed. (Status: Rear ON)
“00”[CR] = Picture is top/bottom and left/right reversed.
(Status: Ceiling ON )
Unacceptable “?” [CR]