Specifying the paper length, Removing the roll from the printer, See "specifying the paper length.") – Canon imagePROGRAF iPF650 User Manual

Page 601: P.585

Advertising
background image

Specifying the Paper Length

When changing the length of paper after the paper has been advanced, specify the length as follows.

Note

• Specify the paper length when you have set ManageRemainRoll to On. (See "Keeping Track of the

Amount of Roll Paper Left.")

→P.591

1.

On the Tab Selection screen of the Control Panel, press ◀ or ▶ to select the Paper tab (

).

Note

• If the Tab Selection screen is not displayed, press the Menu button.

2.

Press the OK button.
The Paper Menu is displayed.

3.

Press ▲ or ▼ to select Chg. Paper Size, and then press the OK button.

4.

Press ▲ or ▼ to select Roll Length, and then press the OK button.

5.

Press ▲ or ▼ to select the length of paper loaded in the printer, and then press the OK button.
Specify the roll length as follows.

1.

Press the ◀ or ▶ button to move to the next field for input.

2.

Press the ▲ or ▼ button to enter the value.

3.

Repeat steps 1 and 2 to finish entering the value, and then press the OK button.

Removing the Roll from the Printer

Remove rolls from the printer as follows.

Note

• If you need to cut the roll, see "Specifying the Cutting Method for Rolls."

→P.594

Handling Paper

>

Handling rolls

>

iPF650

Specifying the Paper Length

5

585

Advertising