Replacing the printhead, See "replacing the printhead, P.742 – Canon imagePROGRAF iPF650 User Manual

Page 758

Advertising
background image

Caution

• Do not remove the Maintenance Cartridge or ink tanks during either Head Cleaning A or Head Cleaning B.

Note

• If printing does not improve after Head Cleaning B, try repeating Head Cleaning B once or twice. If this

still does not improve printing, the Printhead may have reached the end of its useful life. Contact your Canon
dealer for assistance.

• Nozzles are periodically checked to ensure they are clear. Configure the settings on the Control Panel menu

in Nozzle Check. (See "Menu Settings.")

→P.674

Perform cleaning as follows.

1.

On the Tab Selection screen of the Control Panel, press ◀ or ▶ to select the Settings/Adj. tab (

).

Note

• If the Tab Selection screen is not displayed, press the Menu button.

2.

Press the OK button.
The Set./Adj. Menu is displayed.

3.

Press ▲ or ▼ to select Maintenance, and then press the OK button.

4.

Press ▲ or ▼ to select Head Cleaning, and then press the OK button.

5.

Press ▲ or ▼ to select Head Cleaning A or Head Cleaning B, and then press the OK button.
Head cleaning is now executed.

6.

Print a test pattern to check the nozzles, and determine whether cleaning has cleared the nozzles. (See "Checking
for Nozzle Clogging.")

→P.740

Replacing the Printhead

When to replace the Printhead

Replace the Printhead in the following situations.

• If the printing quality does not improve even after one or two cycles of Head Cleaning B from the printer

menu

Maintenance and Consumables

>

Printheads

>

Replacing the Printhead

iPF650

10

742

Advertising