Canon Macro Ring Lite MR-14EX II - Manual (Page 42)

40
Flash Control from the Camera’s Menu Screen
Flash firing
To perform flash shooting, set to [Enable].
E-TTL II flash metering
For normal exposures, set it to [Evaluative]. If [Average] is set, the
flash exposure will be averaged for the entire scene metered by the
camera. Flash exposure compensation may be necessary
depending on the scene. This setting is for advanced users.
Flash synchronization speed in Av mode
You can set the flash synchronization speed when shooting in
aperture-priority AE (f) mode with flash.
Flash mode
You can select [E-TTL II] or [Manual flash] according to your
shooting objective.
Shutter synchronization
You can select the flash firing timing/method from [1st curtain], [2nd
curtain] and [High-speed synchronization]. To perform normal
flash shooting, set [1st curtain].
Flash exposure compensation
In the same way as normal exposure compensation, you can set
exposure compensation for flash. The flash exposure compensation
amount can be set up to ±3 stops in 1/3-stop increments.
FEB
You can take three shots while automatically changing the flash
output. The settable range is up to ±3 stops in 1/3-stop increments.
Clear (flash) settings
You can return the settings for flash units to their default settings.
COP
Y