Acer Altos R910 User Manual

Page 143

Advertising
background image

133

Server boot does not complete POST

Do the following:

•

Make sure the VRMs are plugged in and the pins are not bent.

•

Make sure the CPU is properly seated.

•

Check the BIOS release notes to ensure the BIOS installed on the
platform supports the stepping and the family of processors
currently installed.

•

Make sure the memory boards are populated according to system
requirements.

Server does not recognize all of the processors installed

Do the following:

•

Make sure the VRMs are plugged in and the pins are not bent.

•

Make sure the CPU is properly seated.

HDD activity indicator does not light.

Do the following:

•

Make sure the drive is not disabled in the BIOS setup utility.

•

Make sure the drive’s power and data cables are connected
correctly.

•

Make sure the drive is compatible.

•

Make sure you have not exceeded the power budget for the
server.

•

If using SCSI drives, make sure that each SCSI ID number is unique
on the SCSI bus. See your drive documentation for details on
setting the SCSI ID for your drives.

•

If using a RAID configuration with SCSI drives, make sure the RAID
card is installed correctly.

If you have installed one or more hard drives in the system, do the
following:

•

Make sure the power and signal cables are connected correctly.

Advertising