Acer Altos R910 - Manual (Page 176)

Appendix B: Memory configuration options 166
Maximum performance
Maximum performance is the default memory configuration and
provides the best performance. With four memory boards installed, the
BIOS configures memory as four-way interleaved, across all memory
boards. With less than four memory boards installed, the BIOS
attempts to configure two-way interleaving. If memory cannot be
configured for two-way interleaving, the BIOS defaults to one-way
interleaving. This memory mode allows sparing configuration but does
not support any memory board hot-plug operations.
To configure memory to maximum performance:
1 Do either option below:
• Run BIOS setup. See “Entering BIOS setup” on page 96.
- or -
a During system bootup, enter the System Options Menu. See
“System options menu” on page 90.
b Use the up and down arrow keys to select BIOS Setup Utility,
then press Enter. The BIOS main menu displays on the
monitor.
2 Use the up and down arrow keys to select the Memory menu,
then press Enter. The Memory menu appears.
3 Use the up and down arrow keys to select Configure Memory
RAS and Performance, then press Enter. The Configure Memory
RAS and Performance menu appears.