Canon EOS Rebel T5i 18-55mm IS STM Lens Kit - Manual (Page 148)

148
A Shooting with the LCD Monitor
Each time you press the <B> button, the information display will
change.
Information Display
ISO speed
Exposure level indicator/AEB range
Aperture
Shutter speed
Picture Style
Battery check
Exposure
simulation
Image-recording
quality
White balance
AF point (Quick AF)
Histogram
Drive mode
AE lock
D Flash-ready
b Flash off
Auto Lighting
Optimizer
AF method
Possible shots
Eye-Fi card
transmission
status
Shooting mode
Touch shutter
GPS connection indicator
Switch to auto
selection (AF point)
Digital compass
AEB/FEB/
Multi Shot Noise
Reduction
Magnified view
Quick Control
Metering mode
Built-in flash
settings
Highlight tone priority
Creative filters
Flash exposure compensation
When <g> is displayed in white, it indicates that the Live View image
brightness is close to what the captured image will look like.
If <g> is blinking, it indicates that the Live View image is displayed at
a brightness that differs from the actual shooting result because of low-
or bright-light conditions. However, the actual image recorded will reflect
the exposure setting. Note that noise may be more noticeable than the
actual image recorded.
If you use the <F> or <G> shooting mode, bulb exposure, or flash, the
<g> icon and histogram will be grayed out (for your reference). The
histogram may not be properly displayed in low- or bright-light conditions.
COP
Y