Canon PowerShot G1 X - Manual (Page 220)

220
If an error message is displayed, respond as follows.
No memory card
• The memory card may be inserted facing the wrong way. Reinsert the memory card
facing the correct way (p. 16).
Memory card locked
• The write-protect tab of the SD/SDHC/SDXC memory card or Eye-Fi card is set to the
locked position. Switch the write-protect tab to the unlocked position (p. 15).
Cannot record!
• Shooting was attempted without a memory card in the camera. To shoot, insert a
memory card facing the correct way (p. 16).
Memory card error (p. 172)
• If the same error message is displayed even when you have inserted a formatted
memory card facing the correct way, contact a Canon Customer Support Help Desk
(p. 16).
Insufficient space on card
• There is not enough free space on the memory card to shoot (pp. 43, 67, 91, 123) or
edit images (pp. 160 – 164). Either erase unneeded images (pp. 152) or insert a
memory card with enough free space (see “Specifications” in the Getting Started guide).
Change the battery pack. (p. 15)
No Image.
• The memory card does not contain any images that can be displayed.
Protected! (p. 148)
Unidentified Image/Incompatible JPEG/Image too large./Cannot play back
AVI/RAW
• Unsupported or corrupt images cannot be displayed.
• It may not be possible to display images that were edited or renamed on a computer,
or images shot with another camera.
Cannot magnify!/Cannot play back this content in Smart Shuffle/Cannot
rotate/Cannot modify image/Cannot register this image!/Cannot modify/
Cannot assign to category/Unselectable image.
• The following functions may be unavailable for images that were renamed or already
edited on a computer, or images shot with another camera. Note that starred (*)
functions are not available for movies.
Magnify* (p. 145), Smart Shuffle* (p. 147), Categorize (p. 157), Rotate (p. 155), Edit*
(pp. 160 – 164), Assign as Start-up Image* (p. 171), and Print Order* (p. 208).
• Grouped images cannot be processed (p. 85).
Invalid selection range
• When specifying a range for image selection (pp. 150, 153, 159, 210), you attempted
to choose an initial image that was after the final image, or vice-versa.
On-Screen Messages
COP
Y