Initial preparations, Attaching accessories, Holding the camera – Canon PowerShot SX510 HS User Manual
Page 11: Charging the battery pack
11
1
2
3
4
5
6
7
8
9
10
Cover
Before Use
Common Camera
Operations
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
Tv, Av, and M
Mode
Initial Preparations
Prepare for shooting as follows.
Attaching Accessories
1
Attach the strap.
z
z
Attach the included strap to the camera
as shown.
z
z
On the other side of the camera, attach
the strap the same way.
2
Attach the lens cap to the strap.
z
z
Remove the lens cap from the lens and
attach the lens cap cord to the strap.
z
z
Always remove the lens cap before
turning the camera on.
z
z
Keep the lens cap on the lens when the
camera is not in use.
Holding the Camera
z
z
Place the strap around your neck.
z
z
When shooting, keep your arms close to
your body and hold the camera securely
to prevent it from moving. If you have
raised the flash, do not rest your fingers
on it.
Charging the Battery Pack
Before use, charge the battery pack with the included charger. Be sure to
charge the battery pack initially, because the camera is not sold with the
battery pack charged.
1
Insert the battery pack.
z
z
After aligning the ▲ marks on the battery
pack and charger, insert the battery pack
by pushing it in ( ) and down ( ).
2
Charge the battery pack.
z
z
CB-2LY: Flip out the plug ( ) and plug
the charger into a power outlet ( ).
z
z
CB-2LYE: Plug the power cord into the
charger, then plug the other end into a
power outlet.
z
z
The charging lamp turns orange and
charging begins.
z
z
When charging is finished, the lamp turns
green.
CB-2LY
CB-2LYE