Canon FAXPHONE L190 - Manual (Page 19)

19
Basic Oper
a
tion
Place Documents
Choose the appropriate way to place documents according to the document's type.
IMPORTANT IMPORTANT
•
Place a document after glue, ink, or correction fl uid on the document is completely dry.
•
To prevent paper jams in the feeder, place a document on the platen glass when using the
following types of paper:
- Wrinkled of creased paper
- Carbon paper or carbon-backed paper
- Curled or rolled paper
- Torn paper
- Thin paper
- Documents with staples or paper clips attached
- Transparency
Check available documents.
Size (Width x Length) 8 1/2"
(215.9mm)
11 3/4" (297mm)
Maximum
Weight
Maximum 4.4 lb (2 kg)
Capacity
1 Sheet
Check available documents.
Size (Width x Length) 8 1/2"
(216 mm) 8 1/2"
(216 mm)
5 1/2"
(140 mm)
5 1/2"
(140 mm)
5" (127 mm) 5" (127 mm)
14" (356 mm ) 14" (356 mm )
Min. Min.
Max. Max.
Capacity
(For 21 lb Bond
80 (g/m 2 ))
50 Sheets 50 Sheets
Weight
1-sided document 1-sided document
13.3 lb bond to 27.9 lb bond
13.3 lb bond to 27.9 lb bond
(50 g/ m² to 105 g/ m²)
(50 g/ m² to 105 g/ m²)
2-sided document
2-sided document
16.0 lb Bond to 27.9 lb Bond
16.0 lb Bond to 27.9 lb Bond
(60 g/m² to 105 g/m² )
(60 g/m² to 105 g/m² )
When placing non-standard
documents such as heavy paper,
small paper, or booklets.
Use the platen glass. (→P.20)
When placing multiple documents of
plain paper in the same size, thickness
, and weight.
Use the feeder. (→P.20)