Canon imagePROGRAF iPF8400 - Manual (Page 144)

Messages regarding printing or adjustment Messages regarding printing or adjustment
Cannot execute this command. Use other paper. .......................................................................................... 144
Cannot adjust printhead. ........................................................................................................................................... 147
Cannot calibrate. ........................................................................................................................................................... 144
Excessive temperature or humidity. ..................................................................................................................... 144
Please execute common calibration. .................................................................................................................... 144
Please commn calibrt using above paper. ......................................................................................................... 145
Please calibrate using above paper. ..................................................................................................................... 145
Borderless printng not possible. Paper stretched or shrank. ................................................................... 145
Before borderless printing, move the blue platen switch. .......................................................................... 145
Borderless printng not possible. ............................................................................................................................ 140
Blue platen switch is dirty. ........................................................................................................................................ 145
Move the blue platen switch No.xx to the right. (xx represents a number) ........................................ 146
Cannot adjust paper feed. ........................................................................................................................................ 146
Check printed document. .......................................................................................................................................... 146
Cannot execute this command. Use other paper. Cannot execute this command. Use other paper.
Cause Corrective Action
Paper compatible with
color calibration is not
loaded. 1.
Press the OK button to clear the error.
2.
Load paper that is compatible with color calibration.
See the Paper Reference Guide.
(See "Paper Reference Guide.")
Always make sure the loaded paper matches the type of paper in the printer paper settings. Adjustment cannot
be completed correctly unless the loaded paper matches the settings.
Cannot calibrate. Cannot calibrate.
Cause Corrective Action
The paper for printing a test pattern is soiled. Other-
wise, you have loaded colored paper. Press the OK button to clear the error.
Load unused paper compatible with color calibration.
(See "Paper Reference Guide.")
The test pattern was printed too faintly. Press the OK button to clear the error.
Take steps to remedy faint printing.
(See "Printing is faint.")
→P.113
Direct sunlight or strong lighting may be shining on
the printer and causing the sensor to malfunction. Press the OK button to clear the error.
Take steps to ensure the printer is not used when exposed to direct sunlight or
strong lighting.
Excessive temperature or humidity. Excessive temperature or humidity.
Cause Corrective Action
The temperature or humidity where the
printer is installed is out of the acceptable
range for operation. Press ▲ or ▼ to select Stop, and then press the OK button to stop printing.
Use the printer under suitable environmental conditions. Also note that various environmental
conditions are recommended for various types of paper. For details on the recommended en-
vironmental conditions, see the Paper Reference Guide.
(See "Paper Reference Guide.")
Press ▲ or ▼ to select Continue, and then press the OK button to continue with color cali-
bration. However, note that correct adjustment may not be possible.
Please execute common calibration. Please execute common calibration.
Cause Corrective Action
There is not even one Common calibration execution result. Execute Common calibration.
Cannot execute this command. Use other paper. iPF8400
Basic Guide
Error Message
Messages regarding printing or adjustment
144