Canon LV-8320 - Manual (Page 12)

12
Part Names and Functions
Top Control
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑨ LAMP REPLACE indicator
Lights yellow when the projection lamp
reaches its end of life (pp.65, 72).
⑧ WARNING indicator
– Lights red when the projector detects an
abnormal condition.
– Blinks red when the internal temperature of
the projector exceeds the operating range
(pp.62, 72).
④ POWER button
Turn the projector on or off (pp.20-22).
⑤ POWER indicator
– Lights red when the projector is in
stand-by mode.
– Lights green during operations.
– Blinks green in the Power management
mode (p.53).
③ INPUT button
Select an input source (pp.29, 38-39).
⑥ MENU button
Open or close the On-Screen Menu (p.23).
② POINT▲▼◄► (VOLUME –/+) buttons
– Select an item or adjust the value in the
On-Screen Menu (p.23).
– Pan the image in the Digital zoom +/- mode
(p.37).
– Adjust the volume level (Point ◄► buttons)
(p.26).
⑦ AUTO SET button
Execute the setting of Auto setup (includes
Auto input, Auto PC and Auto Keystone
functions) in the setting menu. (pp.25, 47).
① OK button
– Execute the selected item (p.23).
– Expand or compress the image in the
Digital zoom mode (p.37).