Canon LV-8320 - Manual (Page 51)

Setting
51
Setting
HDMI setup
HDMI setup
Terminal
The COMPUTER IN 2/MONITOR OUT terminal
on the back of the projector is switchable for
computer input or monitor output (p.11). Select
COMPUTER 2 or Monitor out with the Point
▲▼ buttons.
COMPUTER 2 ....... computer input
Monitor out ........... monitor out
Terminal function is not available when
selecting COMPUTER 2 to the input source.
Change the input source to the others
( COMPUTER 1, and so on) so that the Terminal
function will be available. (pp. 27, 29, 39)
This function is only used for HDMI input source.
Image
Select Normal or Enhanced to match the
video range setting of your HDMI Digital
RGB equipment.
Sound
HDMI: When using the HDMI cable, select
HDMI.
Both video and audio are
transferred and you need not to
connect any additional cables for
audio.
COMPUTER 2 : When using the DVI-HDMI
cable, select COMPUTER
2 and connect the audio
cable to COMPUTER IN 2
termimal.
The names for the output setting of Digital RGB
vary from equipment to equipment. For details,
refer to the user’s manual of your Digital RGB
equipment.
When the black parts of the image are
destroyed or stand out, please switch to
Normal or Enhanced, and then switch the
output type of the HDMI Digital RGB output
equipment.
 Note:
The input/output terminal [Computer 2] does not
support EDID. Depending on the computer
used, an adjustment of the resolution might be
necessary after connection of the terminal. For
the adjustment of the resolution please refer to
the owner’s manual of the computer.
* EDID (Extended Display Identification Data):
The display ID of the connected monitor for
transmission of the model name and the setting
value to the computer.