Canon FAXPHONE L100 - Manual (Page 15)

15
4.
Select the fax receive mode.
The receive mode is set to <Auto>.
→ Proceed to Step 5.
• Receive faxes automatically.
• A handset or an external telephone does not have to be connected.
Do you want to use
this machine for fax
only (no telephone)?
Yes
No
Do you want to auto-
receive faxes and
answer phone manually?
Yes
No
Do you want to use
an answering machine
to answer the phone?
Yes
No
The receive mode is set to <Fax/Tel Auto Switch>.
→ Proceed to Step 5.
• Receive faxes automatically.*
• You can respond to a telephone call by picking up the handset.
• A handset or an external telephone must be connected to the
machine.
The receive mode is set to <Answer>.
→ Proceed to Step 5.
• Receive faxes automatically.
• You can respond to telephone calls using the built-in answering
function.
• An external telephone must be connected.
The receive mode is set to <Manual>.
→ Proceed to Step 5.
• Receive faxes automatically.
• A handset or an external telephone must be connected to the
machine.
You can specify how the machine should operate for a fax call or telephone call.
By answering the prompts that appear on the display, you can set the machine
to one of the following four operation modes.
Yes
Yes
Yes
No
No
No
Preface
1
Installing the Machine and Specifying Initial Settings
2
Appendix Installing the Drivers and Connecting to a Computer
3
For details about each fax receive mode:
See “RX Mode” in the e-Manual.