Canon FAXPHONE L100 - Manual (Page 21)

21
Preface
1
Installing the Machine and Specifying Initial Settings
2
Installing the Drivers and Connecting to a Computer
3
Appendix
Installing the Software
(For Macintosh)
To view how to install the software, see the following guides from the User Software CD-ROM.
Printer Driver
Canon MF Printer Driver Guide:
[UFR II] → [us_eng] → [Documents] → [Guide] → [index.html]
Fax Driver
Canon Fax Driver Guide:
[FAX] → [us_eng] → [Documents] → [Guide] → [index.html]
Connect a USB Cable to Add the Machine to the Macintosh
After installing the software such as printer driver, connect a USB cable to add the machine to the Macintosh. Make sure to
connect a USB Cable after installing the software.
To view how to add the machine to the macintosh, see the Installation Guide for each driver.
Follow the procedure below to connect a USB Cable.
(A)
(A)
(B)
Remove the cap plug (A).
Remove by pulling on the string. Connect the cable.
• Flat end (A):
Connect to the USB port on the computer.
• Square end (B):
Connect to the USB port on the machine.