Canon VB-C60 - Manual (Page 26)

2-10
VK-Lite System Installation Example
7. Select a camera server to register, and then click [Add Camera Server].
The [Add Camera Server] dialog box is displayed.
8. Configure the following settings in the [Add Camera Server] dialog box.
• Enter the [User Name] and [Password], and then click [Connect]. Make sure that the live view is
displayed in the [Preview] window.
• Enter the [Camera Name], and select the [Location] and [Zone] of the camera.
• Click [Start Control], and adjust the viewing angle of the camera.
9. Click [OK].
Now, the camera server has been registered. The registered camera server information is displayed in the
right list of the screen.
10. Repeat step 6 to 9 to register other camera servers, if necessary.
11. Check that all of the camera servers that you are using have been registered successfully in the right list of
the screen.