Canon SELPHY CP800 Black - Manual (Page 66)

1
2
3
Installing the Battery
Charging the Battery

Using the Battery Pack
Use the battery pack NB-CP2L (sold separately) for printing images in places without a power outlet.
With a fully charged battery, you can print approximately 36 sheets* of Postcard size paper.
* The number of possible prints is based on Canon testing standards, and may change depending on printing
conditions.
Remove the battery terminal cover.
Plug in SELPHY (p. 10) .
Charging starts and appears on the screen.
Charging completes after approximately 4 hours. and
disappears.
If you press the q button while the battery is charging (p.
11) , SELPHY can be used; however, charging will stop.
When you turn SELPHY off (p. 11) , appears and
charging resumes.



For cautions concerning the battery, refer to the user guide included with the battery.
When
is displayed and you press any button other than the q button for 3 seconds or
longer, will disappear. When the screen is turned off while the battery is charging and you
press any button other than the q button, will appear after approximately 10 seconds.
If SELPHY is not used for more than five minutes, it will automatically turn off to save power.
If a red
appears, the battery has reached the end of its life span. Purchase a new battery.




Remove the battery cover.
Slide and hold the cover lock (  ), then remove the cover
towards (  ).

Attach the battery.
Insert the tab (  ), then push the battery (  ) until it clicks
and locks into place.

Air Vents
COP
Y