Cop y, Handling precautions – Canon SELPHY CP800 Black User Manual

Page 71

Advertising
background image

34

Handling Precautions

Do not subject the printer to excessive force. Force or impact on the printer may result in paper jams or

equipment damage.

Be careful not to spray the equipment with insecticides or other volatile substances. In addition, do not

store the equipment in contact with rubber or vinyl products for long periods of time. This may cause

deterioration of the casing.

Depending on the room temperature, SELPHY may overheat and temporarily stop operating. This is not a

malfunction. SELPHY will resume normal printing as soon as it cools down. Temporary stoppages increase

printing time and are most likely to occur when printing continuously, if a room is unusually warm, or if the

air vents on the back of SELPHY are blocked and internal temperature is high.

Avoid condensation on SELPHY when moving it from a cold to a warm place by putting it in an airtight,

sealable plastic bag and allowing for adjustment to temperature changes gradually before removing from

the bag. In the event that condensation does form within SELPHY, keep it at room temperature until the

water droplets evaporate naturally before use.

When SELPHY becomes dirty, wipe the casing with a soft dry cloth.

When dust or dirt has accumulated on the battery cover or vents

(pp. 6, 29)

, be sure to remove the ink

cassette

(p. 14)

before cleaning. If dust gets in through the vents, the printer may not print cleanly.

Never wipe using volatile solvents such as benzine, paint thinner, or diluted neutral solvent. They may cause

deformation or peeling of the casing.


Rated Input

100 – 240 V AC (50/60 Hz) 1.5 A (100 V) – 0.75 A (240 V)

Rated Output

24 V DC, 2.2 A

Operating Temperatures

0 – 40 °C (32 – 104 °F)

Weight

Approx. 310 g (10.9 oz.)

Compact Power Adapter CA-CP200 W

Type

Rechargeable lithium-ion battery

Nominal Voltage

22.2 V DC

Nominal Capacity

1200 mAh

Battery Life (Charge Cycles)

Approx. 300 times

Operating Temperatures

5 – 40 °C (41 – 104 °F)

Dimensions

110.0 x 40.7 x 37.5 mm (4.33 x 1.60 x 1.48 in.)

Weight

Approx. 230 g (8.11 oz.)

All data is based on tests by Canon.

Printer specifications or appearance are subject to change without notice.


Battery Pack NB-CP2L (Sold Separately)

COP

Y

Advertising