Canon CANOSCAN LIDE 700F - Manual (Page 6)

Installing the Software
4
Installing the Software
1
Place the Setup CD-ROM in the drive.
For Macintosh: Double-click the Setup icon. Enter the administrator ID and password on the
authentication dialog box.
For Windows 2000/XP and Macintosh, skip step 2 and go to step 3.
2
For Windows Vista, when the AutoPlay dialog box
appears, run the setup program, and then click Continue
to proceed when the User Account Control dialog box
appears.
3
If prompted, select your language and place of residence, and then click Next.
In some countries, these dialog boxes will not appear.
• Do NOT connect the scanner to a computer before installing the software. If you connect the
scanner and the Found New Hardware screen appears, unplug the USB cable from the
computer and click Cancel. The screen may close automatically when the USB cable is
unplugged.
• Quit all running applications before installation.
• To upgrade from Windows XP to Windows Vista, first uninstall software bundled with the
Canon scanner.
• Log in as an administrator to install the software.
• Do not switch users during the installation process.