Canon CANOSCAN LIDE 700F - Manual (Page 9)

Preparing the Scanner
7
Preparing the Scanner
Unlocking the Scanner
1
Peel the shipping tapes off the scanner.
2
Slide the lock switch on the bottom of the scanner toward the unlock mark ( ).
Connecting the Scanner
1
Connect the scanner to your computer with the supplied USB cable.
• Handle the scanner with both hands. Be careful not to drop the scanner.
• When you carry or transport the scanner, make sure to slide the lock switch toward the lock
mark ( ) to fasten the scanning unit.
• Only use the USB cable provided with the scanner. Use of other cables may lead to a
malfunction.
• Do not touch the metallic parts of the USB connector.
• The scanner does not have a power switch. The power is activated as soon as the computer is
turned on.
• When the scanner is connected to the USB 1.1 port and HI-SPEED USB Device Plugged
into non-HI-SPEED USB Hub message appears, ignore the message. The scanner operates
in this condition without problems.
Unlock Mark